06/24 Cleaning Chemistry Product Catalog 20 24
3D means three dimensional operation: MultiEx 3D cleaners work in three dimensions: Dimension 1: Flux removal. Flux residues are removed so that the risk of electrical malfunctions due to corrosion is minimized. Dimension 2: Deoxidation of the metal surfaces. Metal oxides are removed so that electrical conductivity is not negatively affected and soldering can be carried out reliably if required. Dimension 3: Passivation. The deoxidized metal surfaces are passivated so that cleaned and deoxidized metal surfaces remain oxide-free for longer. MultiE 3D cleaners reliably remove flux residues and metal oxides (e.g. copper or aluminum oxide) and at the same time protects against re-oxidation of the metal surfaces. MultiEx 3D cleaners are supplied as a ready-to-use mixture (ReadyMix) for direct use in kolb cleaning systems with PowerSpray® technology and all other common spray-in-air cleaning systems. MultiEx 3D-A3 is an aqueous, alkaline special cleaner for thorough and gentle cleaning of power gentle cleaning of power electronics / DCBs. MultiEx 3D-H2 is an aqueous, alkaline broadband cleaner for thorough and gentle cleaning of PCBAs, especially PCBAs with large metal surfaces. MultiEx 3D-H2 is also suitable for cleaning solder frames, solder carriers and solder masks. kolb MultiEx® 3D cleaners offer aqueous alkaline detergents that are ideally suited for the thorough and gentle cleaning of DCBs / power electronics, PCBAs, HDI PCB's, Flip Chips, ceramic substrates, aluminum, non-ferrous metals and, depending on the cleaning task, also for the qualified cleaning of solder frames, solder carriers and solder masks. MultiEx® 3D detergents remove thoroughly flux, copper oxide / CuO, aluminum oxides / Al2O3, SMD adhesive and (optional), solder paste. MultiEx 3D detergents ® PAGE 1 ▪ DCB + PCBA + Solder-Tools Cleaning + PowerSpray® AirFlow® UltraSonic
The kolb MultiEx® VR series offers aqueous alkaline detergents with an extremely broad spectrum of efficacy. MultiEx® VR detergents are very durable and most suitable for the quick and thorough cleaning with best material protection of PCBAs, ceramic substrates, misprints (single side mounted or bare boards), but also stencils, screens, squeegees and scrapers and conditionally solder carriers, solder pallets, ESD boxes, PCB magazines. Depending on cleaning task MultiEx® VR detergents are also suitable for condensations traps and coolers. Perfectly suited for low standoffs MultiEx® VR detergents are characterized by a nuanced raw material shift between the individual series models, offering a broad spectrum of efficacy. The detergents clean particularly all commercially available fluxes and pastes and also oils, grease and dust. All cleaners of the series provide a high surface cleanliness and are, due to their high fluidity, perfectly suitable for the thorough and best material protecting cleaning of low standoffs. Due to the TS+ pH buffering (see also last page), MultiEx® VR detergents have a significantly longer effectiveness / service life, so they have to be changed less and thus save considerable operating costs. Depending on the product and cleaning task the deterhgents are also suitable for kolb AirFlow® systems as well as all common spray-in-immersion and ultra-sonic cleaning systems. MultiEx® VR series detergents are delivered as ready-to-use mixture (MultiEx® VR-SP also as concentrate) for direct use in kolb systems with PowerSpray® technology and all common spray-in-air cleaning systems. Relevant kolb cleaning systems: ▪ AQUBE® X series for PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs ▪ AQUBE® M series for screens, stencils and tools ▪ PSE M series for screens, stencils and tools ▪ PSE 300 series for screens, stencils and PCBAs • AF series for carriers, machine parts, boxes The MultiEx VR Series ® PAGE 3 ▪ PCBA + Stencil + Tools Cleaning PowerSpray® AirFlow® UltraSonic + +
PCBA + Stencil + Tools Cleaning ▪ PAGE 4 MultiEx VR-18 ® Broadband cleaner for hard to clean fluxes on PCBAs Broadband detergent for PCBAs and many more MultiEx VR-HPA ® MultiEx VR-SP ® Broadband cleaner for PCBAs with sensitive components Get more info PRODUCT DATA pH-value at 20 °C 11.2 Conductance at 20 °C < 100 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application pure (ReadyMix) Application temperature 20 - 45 °C Regenerable yes (TS Technology) PRODUCT DATA pH-value at 20 °C 11.0 Conductance at 20 °C < 100 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application pure (ReadyMix) Application temperature 20 - 45 °C Regenerable yes (TS Technology) Get more info Get more info PRODUCT DATA pH-value at 20 °C 11,2 Conductance at 20 °C < 100 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application ReadyMix, Concentr. Application temperature 20 - 45 °C Regenerable yes (TS Technology)
MultiEx® N-P1 is an aqueous, pH-neutral, single-phase PCBA cleaner - suitable for high-current applications. It dissolves flux and solder paste quickly, thoroughly and gently with high cleaning power. MultiEx® N-P1 provides best material compatibility for sensitive assemblies, power electronics as well as for the materials and labels used. MultiEx® N-P1 has an extremely broad spectrum of activity, regarding different fluxes and solder pastes as well as application temperatures. The detergent has perfect flow properties for cleaning low standoffs. It cleans conditionally also stencils, screens, solder carriers, boxes and magazines. Relevant kolb cleaning systems: ▪ AQUBE® X series for PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs ▪ AQUBE® M series for screens, stencils and tools ▪ PSE M series for screens, stencils and tools ▪ PSE 300 series for screens, stencils and PCBAs PAGE 5 ▪ PCBA + Stencil + Tools Cleaning MultiEx NP-1 ® Multifunctional detergent especially for PCBAs and power electronics PowerSpray® + + Get more info PRODUCT DATA ph-value at 20 °C 7,5 Conductance at 20 °C < 100 μS/cm Flash point > 100 °C VOC content < 20 % Application pure Water solubility fully soluble Application temperature 20 - 45 °C Regenerable yes (TS Technology)
MultiEx® Rapid is an aqueous alkaline high-performance PCBA cleaning concentrate for electronics manufacturing. It specifically removes all kinds of fluxes. The detergent is ideally suited for the thorough and fast cleaning of PCBAs with difficult to clean flux residues (for example after several soldering processes). MultiEx® Rapid is applicable for kolb PowerSpray® systems as well as all common spray-in-air, spray-in-immersion, airin immersion (e.g. kolb AirFlow® systems) and ultrasonic cleaning systems. It is perfectly suited for high temperature cleaning and cleans conditionally also stencils, screens, solder carriers, boxes and magazines. Relevant kolb cleaning systems: ▪ AQUBE® X series for PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs ▪ AQUBE® M series for screens, stencils and tools ▪ PSE M series for screens, stencils and tools ▪ PSE 300 series for screens, stencils and PCBAs ▪ AF series for carriers, boxes PCBA + Stencil + Tools Cleaning ▪ PAGE 6 MultiEx Rapid ® Intensive remover for all kinds of fluxes + + Get more info PRODUCT DATA ph-value at 20 °C 11,0 Conductance at 20 °C < 100 μS/cm Flash point > 100 °C VOC content < 20 % Standard mixing ratio 1:3 Water solubility fully soluble Application temperature 30 - 60 °C PowerSpray® AirFlow® UltraSonic
MultiEx® N7-TS (as ReadyMix or concentrate) is a broadband neutral cleaning agent and provides excellent results for cleaning screens and stencils as well as for misprints and stencil undersides cleaning in screen printers. The rinse suitable detergent can be used in water-free systems / processes. MultiEx® N7-TS cleans particularly pastes, dust, fats, oils and (conditionally) adhesive and flux. Depending on cleaning task also suitable for PCBAs, solder carriers, solder pallets, ESD boxes, PCB magazines. The cleaner is formulated as a single-phase agent and thus the cleaner remains stable in itself without permanent agitation. Relevant kolb cleaning systems: ▪ AQUBE® M series for screens, stencils and tools ▪ PSE M series for screens, stencils and tools ▪ PSE 300 series for screens, stencils and PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs for PCBAs PAGE 7 ▪ Stencil + Tools + PCBA Cleaning MultiEx N7-TS ® Regenerative stencil cleaning and rinsing detergent FlipsideClean PowerSpray® + + Get more info PRODUCT DATA pH-value at 20 °C 6.7 Conductance at 20 °C < 50 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application ReadyMix, Concentr. Application temperature 20 - 45 °C Regenerable yes (TS Technology) Concentrate ReadyMix
Relevant kolb cleaning systems: ▪ AQUBE® M series for screens, stencils and tools ▪ PSE M series for screens, stencils and tools ▪ PSE 300 series for screens, stencils and PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs for PCBAs MultiEx® N8 is an aqueous, pH-neutral regenerative cleaning concentrate. It cleans particularly pastes and adhesives as well as all kinds of fluxes and is most suitable for the quick and thorough cleaning of stencils and screens with best material protection. Depending on cleaning task also suitable for assembled PCBAs, solder carriers, solder pallets, ESD boxes, PCB magazines. The cleaning concentrate to blend with water is suitable for use in kolb systems with PowerSpray® technology and in all common spray-in-air cleaning systems. Stencil + Tools + PCBA Cleaning ▪ PAGE 8 MultiEx N8 ® Regenerative multifunctional cleaning detergent PowerSpray® + + Get more info PRODUCT DATA pH-value at 20 °C 6.7 Conductance at 20 °C < 100 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Standard mixing ratio 1:3 with water Application temperature 20 - 45 °C Regenerable yes (TS Technology)
MultiEx® SC is a pH neutral screen cleaner developed especially for the cleaning of resistant conductive pastes from photo technical screens and stencils, misprints (bare boards), aluminum. Conditionally also suitable for PCBAs, carriers, ESD boxes, PCB magazines. The single-phase detergent needs no phase separation during the cleaning process. It remains stable in itself and does not have to be agitated permanently. MultiEx® SC can also be used as a detergent in a completely water-free process, especially in the case of water-sensitive products. (Water-free rinsing can be carried out e.g. with MultiEx® GC) Relevant kolb cleaning systems: ▪ AQUBE® M series for screens, stencils and tools ▪ PSE M series for screens, stencils and tools ▪ PSE 300 series for screens, stencils and PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs f Anhydrous special screen cleaning detergent MultiEx SC ® PAGE 9 ▪ Screen + Tools + PCBA Cleaning UltraSonic ManualApp PowerSpray® + + Get more info PRODUCT DATA pH-value at 20 °C neutral (water free) Conductance at 20 °C < 50 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application pure (ReadyMix) Application temperature 20 - 45 °C Regenerable yes (TS Technology)
Relevant kolb cleaning systems: ▪ AQUBE® M series for screens, stencils and tools ▪ PSE M series for screens, stencils and tools ▪ PSE 300 series for screens, stencils and PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs f MultiEx® GC is a pH-neutral special cleaning and / or rinsing detergent to remove adhesives, aluminium and silver pastes e.g. from screens, stencils, misprints (bare boards), aluminium and stainless steel. Conditionally also suitable for solder carriers, ESD boxes and magazines, PCBAs and misprints (single side mounted) . The cleaner is formulated as a single-phase agent and so does not have to be agitated permanently. MultiEx® GC can also be used as a rinsing fluid, especially in the case of water-sensitive products in a completely waterfree process. The detergent is certified for solar cell production. Special screen cleaner for SMD adhesives MultiEx GC ® Screen + Tools + PCBA Cleaning ▪ PAGE 10 PowerSpray® + + Get more info PRODUCT DATA pH-value at 20 °C neutral (water free) Conductance at 20 °C < 50 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application pure (ReadyMix) Application temperature 20 - 45 °C Regenerable yes (TS Technology)
MultiEx® B11 is an aqueous alkaline detergent with an extremely broad spectrum of efficacy. The robust economy cleaner is mainly suitable for tools cleaning. MultiEx® B11 cleans particularly SMD-pastes and (conditionally) also SMD adhesives and flux. MultiEx® B11 is most suitable for the quick and thorough cleaning with best material protection of stencils, screens, solder frames, solder pallets, ESD boxes, PCB magazines. Depending on cleaning task also suitable for PCBAs, condensation traps, coolers, steel sheets. Relevant kolb cleaning systems: ▪ AQUBE® M series for screens, stencils and tools ▪ PSE M series for screens, stencils and tools ▪ PSE 300 series for screens, stencils and (optional) PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs ▪ AQUBE® X series for PCBAs ▪ AF series for carriers, machine parts, condensate filters Alkaline multifunctional aqueous tools cleaning detergent MultiEx B11 ® PAGE 11 ▪ Stencil + Tools + PCBA Cleaning PowerSpray® AirFlow® UltraSonic + + Get more info PRODUCT DATA ph-value at 20 °C 11.1 Conductance at 20 °C < 100 μS/cm Flash point > 100 °C VOC content < 20 % Standard mixing ratio 1:3 with water Water solubility easily soluble Application temperature 20 - 45 °C Regenerable yes (TS Technology)
Relevant kolb cleaning systems: ▪ AQUBE® M series for tools, screens, stencils ▪ PSE M series for tools, screens, stencils ▪ PSE 300 series for screens, stencils and (optional) PCBAs ▪ AQUBE® L series for PCBAs ▪ PSE L series for PCBAs ▪ AQUBE® X series for PCBAs ▪ AF series for carriers, machine parts, condensate filters MultiEx®A12 is an aqueous alkaline detergent particularly for fluxes and solder pastes. It is most suitable for the quick and thorough cleaning of solder frames, solder pallets, ESD boxes, PCB magazines and also PCBAs. Depending on cleaning task also suitable for screens, stencils, condensation traps, steel sheets. MultiEx® A12 is a ReadyMix for direct use in kolb systems with PowerSpray® or AirFlow® technology and any common spray-in-immersion or spray-in-air cleaning system. Depending on product and cleaning task also suitable for ultrasonic cleaning systems. Alkaline multifunctional water based broadband detergent MultiEx A12 ® Tools+ PCBA + Stencil Cleaning ▪ PAGE 12 PowerSpray® AirFlow® UltraSonic + + Get more info PRODUCT DATA pH-value at 20 °C 11-2 Conductance at 20 °C < 100 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application pure (ReadyMix) Application temperature 20 - 45 °C Regenerable yes (TS Technology)
ContraFlux® Basic is a proven, versatile, aqueous, alkaline broadband detergent concentrate that has been specially developed for the maintenance cleaning of tools and containers in electronics production. In particular, it cleans all types of flux residues and is ideal for quick and thorough cleaning of soldering frames, soldering masks, ESD boxes, PCB magazines and, to a certain extent, condensate traps and radiator cladding. The cleaner is designed for kolb AirFlow® systems as well as for all common spray-in-immersion cleaning systems. Depending on the product and cleaning task, it is also suitable for ultrasonic cleaning devices. Relevant kolb cleaning systems: ▪ AF series for carriers, machine parts, pallets, ESD boxes, condensate traps The most versatile detergent for AirFlow® systems ContraFlux Basic ® PAGE 13 ▪ Tools + Filter Cleaning AirFlow® UltraSonic ManualApp + Get more info PRODUCT DATA pH-value at 20 °C 11,4 Conductance at 20 °C > 100 μS/cm Flash point > 100 °C VOC content < 20 % Standard mixing ratio 1:3 with water Water solubility fully soluble Application temperature 20 - 45 °C
Relevant kolb cleaning systems: ▪ AF series for carriers, machine parts, pallets, ESD boxes, condensate traps ▪ AQUBE® M series for tools, screens, stencils ▪ PSE M series for tools, screens, stencils ContraFlux® BC is an aqueous alkaline broadband detergent concentrate specifically designed for maintenance cleaning of tools and containers used in electronics manufacturing. It cleans particularly all kinds of flux residues. ContraFlux® BC is ideally suited for the quick and thorough cleaning with best material protection of ESD boxes, PCB magazines, solder frames and masks. Depending on the cleaning task also suitable for misprints, stencils and filters. Suitable for AirFlow® and PowerSpray® systems as well as for all common spray-in-immersion and spray-in-air cleaning systems. Conditionally also suitable for ultrasonic cleaning systems and manual cleaning. Cleaning concentrate especially for maintenance cleaning ContraFlux BC ® Tools + Filter +Stencil Cleaning ▪ PAGE 14 AirFlow® PowerSpray® UltraSonic ManualApp + Get more info PRODUCT DATA pH-value at 20 °C 13,4 Conductance at 20 °C > 100 μS/cm Flash point > 100 °C VOC content < 20 % Standard mixing ratio 1:3 with water Water solubility fully soluble Application temperature 20 - 45 °C
ContraFlux® FM is an aqueous alkaline special cleaner for maintenance cleaning especially of condensate management systems specifically from condensate and rosin. It is ideally suited for the quick and thorough cleaning of condensate traps, filter sheets, coolers, cyclones. Depending on the cleaning task also suitable for solder frames, solder pallets, ESD boxes and PCB storage magazines. ContraFlux® FM can absorb flux up to 20 percent of its volume. This means a very long service life and thus high cost efficiency. Ideally suited for the external cleaning of piping and cyclones. Relevant kolb cleaning systems: ▪ AF series for filters, c condensate traps, carriers, machine parts, pallets, ESD boxes PAGE 15 ▪ Filter + Tools Cleaning Alkaline multifunctional aqueous tools cleaning detergent ContraFlux FM ® AirFlow® UltraSonic ManualApp + Get more info PRODUCT DATA pH-value at 20 °C 12.4 Conductance at 20 °C < 50 μS/cm Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application undiluted Application temperature 20 - 45 °C
Relevant kolb cleaning systems: ▪ AF series for filters, condensate traps, carriers, machine parts, pallets, ESD boxes StoveEx® is an extra strong alkaline cleaning concentrate especially developed for the removal of stubborn and burnt-on dirt and epoxy resins. It cleans especially condensate traps, filter plates, coolers and cyclones. It is conditionally also suitable for solder frames and pallets, ESD boxes and PCB storage magazines. StoveEx® is suitable vor AirFlow® (air- / spray-in immersion) and ultrasonic systems. It is s available exclusively for PP systems and not suitable for the cleaning of galvanized surfaces, aluminum and non-ferrous metals. Filter + Tools Cleaning ▪ PAGE 16 Extra strong aqueous detergent concentrate for maintenance cleaning StoveEx® AirFlow® UltraSonic ManualApp + Get more info PRODUCT DATA pH-value at 20 °C 13.8 Conductance at 20 °C > 100 μS/cm Flash point > 100 °C VOC content < 20 % Standard mixing ratio 1:2 Water solubility fully soluble Application temperature 20 - 45 °C
kolb MultiEx® CP is a water-free, single-phase intensive cleaner especially for the conformal coating sector and the removal of hthermal pastes. It can be used for coating substrates, screens, stencils and metals. The detergent removes parylene coatings, epoxy resins, acrylic paints, synthetic resin paints, nitro paints, two-component paints, UV paints, powder coatings, polyurethanes and various thermal pastes. Suitable cleaning systems are all kolb AQUBE® and PSE MH and MV PowerSpray® pressure spray systems. PAGE 17 ▪ Coating Removal + Stencil Cleaning Detergent for mechanical paint stripping and removal of thermal pastes MultiEx CP ® PowerSpray® ManualApp Get more info PRODUCT DATA pH-value at 20 °C not measurable (water free) Flash point > 100 °C VOC content < 20 % Application undiluted Application temperature 20 - 55 °C Relevant kolb cleaning systems: ▪ AQUBE® MH series for carriers tools, machinery parts ▪ PSE MH series for carriers tools, machinery parts ▪ AQUBE® MV series for screens, stencils ▪ PSE MV8 TWIN for screens, stencils +
Relevant kolb cleaning systems: ▪ AQUBE® MV series for screens, stencils ▪ PSE MV8 for screens, stencils ▪ PSE 300 series for screens, stencils kolb CarrierSeal® is a liquid sealing for coating carriers / goods carriers or for chamber parts of coating machines. If coating carriers or chamber elements - with CarrierSeal® applied prior to the coating process - are as heavily contaminated by varnish residues that optimal function is no longer guaranteed, these residues can be removed at lightning speed by simply manually peeling or machine cleaning off of the sealing film. For machine cleaning it is recommended to use a pressure spray system with vertically operating rotors, which normally cleans stencils or assemblies e.g. kolb AQUBE® or PSE MV or PSE 300 PowerSpray® systems. Coating Removal ▪ PAGE 18 Sealing liquid against stubbornly adhering coating residues CarrierSeal® ManualApp PowerSpray® + Get more info PRODUCT DATA pH-value at 20 °C 7.2 Flash point > 100 °C VOC content < 20 % Water solubility fully soluble Application undiluted Application temperature 20 - 90 °C - peak up to 120 °C
WetWipes WetWipes SA120 are ready to use tissues, soaked with the special aqueous and pH-neutral detergent WipeEx SA120 for the manual cleaning of SMD-tools such as scrapers, squeegees etc. from SMD-adhesive and SMD-paste. WipeEx SA120 WipeEx SA120 is an aqueous pH-neutral cleaning ReadyMix for the underscreen machine cleaning with fleece in screen printers. It cleans SMD-adhesive and SMD-paste and is ready for use in cleaning tanks of common screen printers with stencil underscreen cleaning. CF1® CF1® is an aqueous alkaline cleaning ReadyMix for manual cleaning of reflow ovens and soldering systems. It cleans fluxes quickly also from solder frames, carriers, GRP, plastics, stainless steel, glass etc. thoroughly with best possible product protection. OF1® OF1® is an oven cleaning gel for manual cleaning of SMD reflow ovens (process chamber), wave soldering systems, vapor phase soldering and selective soldering systems. It cleans quickly, thoroughly, without rinsing and with the best possible product protection of flux and solder paste. G50® G50® is an aqueous alkaline cleaning ReadyMix for manual intensive cleaning of hardened and old residues. G50® oven cleaner dissolves fluxes quickly, thoroughly and gently, e.g. also from machine parts, solder frames, carriers, GRP, plastics, stainless steel, glass etc. FR60 / FR100 FR R60 and FR100 are spray detergents for quick manual cleaning of PCBAs. They are perfectly suited for the fast removal of flux residues due to their short application time. FR60 spray is ideal for normal PCBA contaminations. For stubborn contamination it is recommended to use FR100 spray. Special Detergents PAGE 19 ▪ Various Applications Get more info Get more info Get more info Get more info Get more info Get more info
RM24 RM24 is a rinsing fluid especially developed for the rinsing of sensitive surfaces (e.g. copper and brass alloys) in a separate rinsing containment / drip tray. RM24 is an alternative to water and dries residue-free under air. SG Clean SG Clean is a very efficient ready to use stainless steel and glass cleaner. SG Clean will be sprayed pure or blended 1:1 with water (depending on contamination) onto the surface to be cleaned and then be wiped off with a dry cloth. DisplayClean DisplayClean is especially suitable for the displays of kolb cleaning systems, common computer displays as well as for the cleaning of almost all plastic surfaces. DisplayClean acts antistatic to prevent from electrostatic charges and dust attraction on displays and surfaces. ESD FloorClean ESD FloorClean is a combined cleaner and polisher for ESD-floors to be used for the daily care, applied in a wet-wiping process. A permanent polishing process will enhance the durability and appearance of the polish. Also the conductivity of the floor will be optimized. ESD UniClean ESD UniClean is a neutral cleaner especially for ESD-equipment for all kinds of working tables, shelves and other equipment. ESD UniClean has antistatic properties and is dust repellant. The electrostatic charge will be suppressed e.g. on computer screens. MaintClean® MaintClean® is a concentrate for the elimination of limescale, fungi and bacteria for use in almost all kinds of electronics cleaning systems. MaintClean® cleans also during the vapor phase and thus reaches areas that normally are difficult to access with liquids. Special Detergents Various Applications ▪ PAGE 20 Get more info Get more info Get more info Get more info Get more info Get more info
DIS 10/4 DIS 10/4 is an aqueous, pH-neutral cleaning bath additive (dispersing additive) that boosts detergents for flux and resin removal in electronics cleaning systems. The mixing ratios go from 0.4 to 4 % depending on the detergent type and constitution. AntiFoam F12 AntiFoam® F12 is an aqueous, pH-neutral silicone-free foam regulator for kolb cleaning detergents. The surface active single-compound antifoaming agent is added, depending on water hardness, in a ratio of approx. 0.07 to 3 % to the detergent / water mix and can be rinsed residue free. PowerBooster® HPA PowerBooster® HPA is an additive for a variety of kolb detergents with a strong cleaning power boost. PowerBooster® HPA can be used both to quickly and thoroughly clean contaminated, less sensitive parts and / or to be added as a refresher to degrading cleaners. PowerBooster® MPA PowerBooster® MPA is an additive for a variety of kolb detergents with an evenly balanced boost of cleaning power / refreshing to degrading cleaners and corrosion protection. It can be used both to quickly and thoroughly clean contaminated, less sensitive parts and / or to be added as a refresher to degrading cleaners. PowerBooster® TPA PowerBooster® TPA is an additive for a variety of kolb detergents with highest cleaning power boost and moderate corrosion protection. PowerBooster® TPA can be used both to quickly and thoroughly clean heavily contaminated, robust parts and / or to be added as a refresher to degrading cleaners. AntiFoam EL50 AntiFoam® EL50 is an aqueous and silicone-free neutral deaerator and defoamer which is added directly to the cleaning bath with foam occurring due to the entry of dirt. The mixing ratio e.g. at 75 l bath volume is 50 - 200 ml EL50 equal to 0.07 to 0.3%. Detergent Additives PAGE 21 ▪ Performance Enhancers Get more info Get more info Get more info Get more info Get more info Get more info
pH Sticks pHSticks are measuring stripes allow a quick, approximate (tolerance: +- 0.5 - 1) control of the pH-value e.g. of a cleaning detergent or rinse water. For more detailed inspections, kolb has test kits with appropriate equipment on offer (see below). pHReducer pHReducer reduces the pH-value of a saturated detergent / water mixture to a level of approx. 6 - 8, thus enables an environment-friendly disposal and is especially suited for mixture neutralisation in kolb sewage water processing systems. It reaches its best efficiency at a mixing ratio of approx. 2 to 3 l to 100 l cleaning bath mixture. 4-part pHReducer 4-part pHReducer reduces the pH-value of a saturated detergent / water mixture to a level of approx. 6 - 8, thus enables an environment-friendly disposal and is especially suited for mixture neutralisation in kolb sewage water processing systems. It reaches its best efficiency at a mixing ratio of approx. 0.5 to 0.8 l to 100 l cleaning bath mixture. SC300 SC300 is a complete test kit in a service case for fast bath monitoring / analysis of the current operating state of a TS powered cleaning medium. With the test kit, tank contents, with kolb TS cleaners, can be easily and quickly monitored and checked regularly. SC400 SC400 is a complete analysis kit in a service case for fast state determination / process monitoring of kolb MultiEx® cleaners. The following measuring options are available with the SC400: 1. Refraction / brix, 2. pH value 3. μS conductance (maximum 1999 μS), 4. Total hardness SC600 SC600 is a test set in a service case for the rapid detection of flux residues. With the kolb FluxControl fluid contained in the case, PCB assemblies or solder joints can be quickly and easily checked for critical interferences by flux. Detergent Additives & Service Products Performance Enhancers ▪ PAGE 22 Get more info Get more info Get more info Get more info Get more info Get more info
Technical changes / errors reserved. Product images may vary from the original. Copyright: © kolb Cleaning Technology GmbH 2024 Nr. 03 / 04/24 Our international branches as well as our global distribution partner network are always at your service: Please contact us any time to arrange an appointment. kolb Cleaning Technology GmbH • Karl-Arnold-Str. 12 47877 Willich • Germany • Phone: +49 (0)2154 9479 38 e-mail: info@kolb-ct.com kolb Cleaning Technology AP Pty Ltd • 6 / 150 Canterbury Road NSW 2200 Bankstown • Australia • Phone: +61 2 97 900 273 Fax: +61 2 97 083 040 • e-mail: sales@asia.kolb-ct.com kolb Cleaning Technology AP Pty Ltd • No 668, East Bejiing Road • Hitech Kingworld East Tower, Level 27, Unit A1 Shanghai 200001 • PR China • Phone: +86 21 6322 -2561 Fax: +86 21 6322 -6772 • e-mail: sales@asia.kolb-ct.com kolb Cleaning Technology USA LLC • 410 S Sunset • Unit C Longmont, CO 80501 • USA • Phone: +01 970 532 5100 Fax: +01 970 532 5101 • e-mail: sales@usa.kolb-ct.com Hotline Information & Sales: Monday - Friday from 8 am to 5 pm, Phone +49 (0) 2154 / 9479 - 38. Service & Technical Support: Monday - Friday from 8 am to 3 pm, Phone: +49 (0) 2154 / 9479 - 44, in case of urgency also dial extension - 38, - 37 or - 22. Service Request You require our support? For agreements / questions via telephone you can reach us under our Hotline +49 (0) 2154 / 94 79 - 44, Monday-Friday 8 am to 3 pm If you need a technician, please send us the completed kolb service requisition. You will find it in the manual of your cleaning system or online right here >> Trainings kolb offers trainings and workshops for the optimization of our customers processes and for their service- and maintenance teams - upon request with tailored training concepts and certificates for the participants. Trainings can likewise be executed in our demonstration center or directly at our customers plant. TS+ TS+ labeled cleaners have a high-volume longlife pH buffering, about twice as high as comparable products on the market. TS+ detergents need to be changed less frequently and thus save considerable costs and also protect the environment. TernarySeq TernarySequence® identifies the triple stage detergent technology developed by kolb. TS-powered detergents can be entirely regenerated using very simple filtration. WaterFree WaterFree identifies anhydrous kolb detergents as well kolb cleaning systems which operate in a closed cycle without water (connection), only with a communicating cleaning / rinsing detergent. LowTemp LowTemp identifies cleaners that reach their full effectiveness and viscosity to clean low standoffs already at 20-45 °C, thus making processes more stable, extending the cleaner's service life, saving energy and protecting machines and materials. LowConduct LowConduct identifies detergents that contain very little conductive material, preventing cleaner-related conductivity (ionic contamination) from being transferred into rinsing processes. These cleaners significantly save water and energy. SinglePhase SinglePhase identifies homogeneous (single- phase) detergents that do not need to be mixed before use and later not permanently agitated. They work immediately with full cleaning effect, thus reducing process times and enabling cost-saving systems technology. Icons explanation Service & Touch Points PAGE 23 Hotline Training
RkJQdWJsaXNoZXIy MjI1MTM3NQ==