Washing Carriers & Frames kolb offers a whole range of tailored frames and carriers for PCB, misprint, stencil and parts cleaning e.g. adapter washing frames for, frameless stencils, DEK Vector-Guard stencils, LaserJob stencils, misprinted boards, PCBs, PCBAs, squeegees and scrapers. Decalcification Unit Ensuring required tap water quality for the rinse circuit. In the case of systems connected to a tap water supply on site, where the water quality of which does not correspond to the required < 10°dH or < 350 µS conductivity value, the water quality required for the rinsing process can be produced by the decalcification unit. By means of the ball valve above the cartridge, the blend between the city water and the treated (decalcified) water is adjusted. SpeeLoad Carts Stainless steel set-up carts for the transport of SlideIn Quick Load inserts within a production area. They allow faster and easier transport when the load unit baskets cannot be loaded in the immediate vicinity of the cleaning system. The trolley fits exactly to the size of the corresponding machine, so that the complete loading unit can be easily and smoothly pushed into the cleaning chamber. SlideIn Quick Load Inserts Speed loading slide in units with two, three or four drawer baskets. The drawer baskets can be loaded outside of the cleaning system, which facilitates handling. If two units are in use, one can be loaded while a filled one runs through a cleaning cycle in the machine. The loading and unloading then requires only minimal system downtime, since the loaded units can be completely slided in and out. Electronic Rotor Run Control To monitor correct rotor operation in closed kolb AQUBE® and PSE systems. The rotor run control option checks the functioning of the rotors electronically, to prevent from rotor damage e.g. because of loading mistakes or slipped products. Built-in sensors at each half turning of each rotor send a signal to the PLC. Rotor QuickConnect QuickConnect is a rotor speed clamping system. The horizontal center rotors of a kolb cleaning system can be installed or removed within a few seconds. If goods to be cleaned require more headroom than the normal rotor arrangement allows, the center rotors can be easily removed using the quick-release system. The rotors for smaller goods to be cleaned can be installed again just as quickly, which guarantees the optimum flexibility of the cleaning chamber. Accessory program (excerpt) Accessories ▪ PAGE 14 Get more info Get more info Get more info Get more info Get more info Get more info
RkJQdWJsaXNoZXIy MjI1MTM3NQ==